2× Yotta™
Canopy irradiance
One sensor at the canopy top, one at the lower tier — see exactly how much PAR is reaching each layer and where your lamp coverage drops off.
$380.00 $400.00
Two Yotta sensors for canopy-level irradiance and four Tempest 200s for multi-zone climate. Together, they give a cultivator the data backbone needed to manage light, temperature, and humidity in production environments — and prove it later.
Six sensors. Indefinite Yotta runtime, multi-year Tempest 200 batteries.
Six sensors total: two for light at the canopy, four for climate around the room. Cover up to four micro-zones with redundancy on the irradiance side.
Canopy irradiance
One sensor at the canopy top, one at the lower tier — see exactly how much PAR is reaching each layer and where your lamp coverage drops off.
Multi-zone climate
Place four sensors around the room — front/back, top/bottom — to detect VPD drift, dead spots, and uneven HVAC distribution before yield suffers.
Two Yottas at different canopy heights reveal exactly where light intensity falls off — and how much yield you're leaving on the table.
Four Tempest 200s deliver enough spatial coverage to keep vapor-pressure deficit inside spec across the whole room, not just at the controller.
Tamper-evident logs survive power outages and reset attempts. Tap to export when an inspector — or your insurance adjuster — asks.
Cannabis cultivators and indoor farmers running production-grade rooms where lighting, humidity, and temperature directly drive yield and quality. Compliance-conscious operations that need an immutable environmental record per harvest cycle. Multi-room facilities standardizing on one sensor stack across the operation.
Scaling further? Pair multiple Cultivation Kits per room, or add an Irradiance Array for higher-density light mapping.
this item would be added to your cart once the Shopify integration is wired up. This is a static rebuild — checkout is intentionally stubbed.